Avenson Audio Blend Parallel Processor From Avenson

Get real-time analog parallel processing in stereo with ANY hardware processor using the Avenson Blend!

Call Us! Toll Free! 888-528-9703
Local / International (+1) 919-682-5552

Talk with a Specialist

Avenson Audio Mid-Side Demo - AES 2011

The Mid Side from Brad Avenson will process your left and right stereo tracks (demonstrated here on the Avenson STO 2 stereo omni microphones) and allow you to process the mids and sides of your tracks. Now you can compress or EQ the mids or sides of your tracks separately with some analog gear. This cool piece of gear allows you to adjust the width of your tracks to give it more or less of a stereo image. Additionally there is a high pass filter. Let us know if you have questions about Mid-Side technique or other questions about how to utilize this powerful tool. 919.682.5552. or 888.528.9703

Signal Chain
- Avenson Audio Mid-Side Stereo Processor

Manufacturer's Description from Avenson

The Blend is a two source stereo mixer that operates as a cross fader between the sources. This is an ideal tool to use for parallel processing or to quickly mix a couple sources while tracking. The polarity feature allows you to flip the phase 180 degress on the B (or wet) input to either correct a cabling issue or to null or cancel the input.

Stereo 16 segment output LED meters allow you to see your levels clearly and the 100mm fader gives you very fine level control.

Both the Mid-Side and the Blend are designed to be transparent tools to compliment your analog outboard gear. Short, clean signal paths keep the signals true to the source while expanding the versatility in processing.

All the Input and Outputs are balanced on 0.25″ TRS connectors. The A (or Dry) inputs are copied to an A (or Dry) output to allow you to loop through the Blend similar to a patchbay.

Housed in an attractive half rack width enclosure with an optional stainless steel rack shelf, the Blend is ready to add more processing power to your racks.

About Manufacturer

Makers of an affordable set of serious omni's, Avenson Audio's hand built microphones are quickly being recognized among the industry as the best sounding omni in its price range. Avenson microphones are manufactured in very limited quantities and allow project studios and tapers to get into a level of omni-directional performance for much less than their competitors with a performance-quality that equals sound quality of omni’s in a substantially higher price category.

Specifications

Input Overload Level	+27dbu (0.1% THD)
Crosstalk	≤ -80 db (@ 1kHz +4dbu)
Frequency Response	5 Hz (-0.2db) – 91 kHz (-2 db)
Signal to Noise	≥ 115 dB 100kHz bandwidth
Power Requirements	85-260 VAC 50/60 Hz <10W
Size	8.55 x 1.75 x 6.3 inches 217 x 45 x 160 mm
Weight	2.7 lbs (1.18 kg)

919-682-5552

ABOUT

SOUND PURE DIFFERENCE

SPECIALS, USED, TRADE

TERMS

- Privacy Notice
- Terms and Conditions