-
Call Us Toll Free888-528-9703
-
Local/International (+1)919-682-5552
Wherever a small, lightweight, inconspicuous microphone for top-quality recording is required, the compact design and clean, transparent sound of our versatile 4006C makes it the perfect choice.
$2,470.00
Directional characteristics: | Omnidirectional |
---|---|
Principle of operation: | Pressure |
Catridge type: | Pre-polarized condenser |
Frequency range: | 10 Hz to 20 kHz |
Frequency range, ± 2 dB: | 20 Hz to 20 kHz |
Sensitivity, nominal ±2 dB at 1 kHz: | 40 mV/Pa; -28 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: | Typ. 27 dB (max. 29 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): | Typ. 79 dB(A) |
Total Harmonic Distortion (THD): | < 1 % up to 134 dB SPL peak |
Dynamic range: | Typ. 119 dB |
Max. SPL, peak before clipping: | 140 dB |
Minimum load impedance: | 2 kohm |
Output impedance: | < 200 ohm |
Cable drive capability: | 100 m (328 ft) |
Output balance principle: | Impedance balancing with Active Drive |
Common Mode Rejection Ratio (CMRR): | > 50 dB |
Power supply (for full specifications): | 48 V Phantom power (± 4 V) |
Current consumption: | 2.8 mA |
Connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
Color: | Matte black |
Weight: | 63 g (2.2 oz) |
Diameter: | 16 to 19 mm (0.63 to 0.75 in) |
Capsule diameter: | 16 mm (0.63 in) |
Length: | 64 mm (2.5 in) |
Output voltage, RMS: | > 4 V |
Polarity: | +V at Pin 2 for positive sound pressure |
Temperature range: | -40 °C to 45 °C (14 °F to 113 °F) |
Relative Humidity (RH): | Up to 90% |
Matching tolerance: | ± 0,5 dB |
Phase deviation for kit: | < 5° |