Originally released in 1974, the D&S II Distortion & Sustainer II is a precursor to the amp-overdrive simulators of later years. With its mild drive, relaxed sustain and high output, the D&S II sits the fence between an overdrive and a distortion. This unique "split personality" makes the D&S II perfect for players that seek a natural-feeling drive sound but with more drive and output than an OD generally provides.

The D&S II accomplishes this task with some unique circuit refinements not typically found in distortions. Like a standard distortion, the D&S II features a diode-clipping stage after the amplifier section of the circuit. However, rather than using the silicon diodes commonly found in today's circuits, the D&S II uses germanium diodes in this clipping stage. The threshold voltage for clipping is 0.1 - 0.2V with germanium and 0.7 - 0.8V with silicon, so the germanium can distort even low level tones, thus making a smoother distortion. In addition, the germanium's rectifier characteristic is inferior to silicon (voltage drop with negative current is not as sharp as that of silicon) - this shortcoming ironically works favorably for the D&S II, creating a somewhat rounded waveform of the clipped signal that contributes to the unit's warm, natural distortion. Due to their "inferior" characteristics, germanium diodes are now a very rare component and have generally been replaced with silicon diodes in other manufacturer's circuits. Ironically, it is these shortcomings that give the D&S II its signature sound.

Also unique to the D&S II is its tone control. While most other overdrives and distortions feature hi boost/hi cut tone circuits, the D&S II tone control uses a low range boost/cut circuit for added bottom end. In addition, the D&S II's tone circuit features the JRC4558 IC chip, generally regarded as sonically superior to other op amp models. The combination of these two elements creates a pedal with more low-end punch than your typical overdrive.

From subtle crunch to intense saturation, the D&S II provides a wide range of useful tube-like tones. If you love the OD808's bark but could use a little more

Free 3-Year Warranty

In addition to the standard included manufacturer warranty, virtually all new products carry our exclusive, industry-leading, absolutely free Sound Pure 3-Year Warranty, which includes parts and labor. It's our way of adding real value to the personal touch our small, dedicated team brings to every purchase.

Coverage exclusions live in Terms & Conditions, Section 27. Read the warranty →