Transmits high SPLs without distortion. Compatible with toms, snares, and percussion. Clips-on quickly and easily wherever you choose. Tough, reinforced housing, and clamp.

The frequency response and cardioid pick-up pattern are optimized for drum sets and other percussion instrument miking, while also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum. Very high sound pressure level handling, in excess of 160 dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condenser microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fiber body takes the knocks and shocks and suppresses impact noise.

Features:

• Rugged reinforced glass-fibre body
• Low sensitivity to impact and handling noise
• Very high sound pressure handling capability
• Low distortion microphone
• Hum compensating coil
• Easy to position due to compact design
• Integral stand mount

• Dimensions - Ø 33 x 59 mm
• Connector - XLR-3
• Frequency response - 40 to 18000 Hz
• Weight - 60 g
• Sensitivity in free field, no load (1kHz) - 1,8 mV/Pa
• Nominal impedance - 350 Ω
• Min. terminating impedance - 1000 Ω

What's in the box?

• 1 e 604
• 1 drum clip
• 1 pouch

Free 3-Year Warranty

Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.

Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →

Returns

Not eligible for Try Before You Buy or the 48-hour approval period. Standard return policy applies — see Terms & Conditions, Section 18 for details.