From Avantone Pro

Anyone familiar with Avantone’s C-series mics knows to expect extremely reliable service and performance that rival the most vaunted mics ever made at a fraction of the cost. Just a glance at Avantone’s unmistakable cabernet-finished mics sparks instant recognition of the industry’s new standard of pro-studio and live application mics.

The CK-40 is Avantone’s most versatile and essential FET-style mic. A pair of 35mm center-terminated, tightly-stacked pressure gradient transducers allow accurate stereo imaging without producing proximity-based phase issues. Each capsule features completely independent controls; a lowpass filter and -10db attenuation keep low-end interference to minimum at any sound level. The upper capsule/grill assembly can rotate up to 90 degrees off-axis with the lower capsule. Thanks to independent multi-pattern switching, XY, M-S and Blumlein stereo separation options are easily available and well-defined, without needing to touch the retro-style shock mount (included).

The Avantone CK-40 uses ultra-quiet Class-A FET circuitry, with well-balanced performance across a wide frequency range, and its stereo imaging and spatial possibilities are limited only by your imagination. The CK-40 is well-suited for recording anything you need to capture.

The CK-40 operates on standard 48-volt phantom power. “Retro” Shockmount, 5-Pin mic cable, 1x2 stereo splitter box, 30' Cable, Foam Filter and Padded wooden box included.

Type
Stereo True Condenser Microphone
Polar Pattern(s)
Cardioid, Omni, Figure-8 (x2)
Capsule
(2) Dual plate 35mm gold sputtered diaphragm / brass assembly
Frequency Response
20-20,000 Hz +/- 3dB
Output Impedance
<=250 Ohms
Sensitivity
-40dB
S/N Ratio
77dB re 1Pa
Maximum SPL
147 dB (0.5% THD @1000Hz)
Equivalent Noise Level
17dB (A weighted EC651)
Output Connector
Male XLR 5-pin with included breakout box and cable
High-Pass Switch
80 Hz 6dB/octave
Attenuation Switch
-10dB
Power Requirement
Standard 48 Volt Phantom (x2) 3mA current consumption
Dimensions
27.6mm X 49mm
Weight
.95 kgs / 2.1 lbs.
Finish
Polished Nickel trim / Metallic Cabernet Red Body

Watch & listen

Budget FET Vocal Mic Shootout: Lauten LA-220 v. Studio Projects C1 v. Miktek C1 v. Avantone CK-7

Also in this recording Lauten Audio LA-220 FET LDC Microphone V1 Studio Projects C1 Large Diaphragm Condenser Microphone Miktek C1 Cardioid Large Diaphragm FET Condenser Microphone Avantone CK-7 Large Diaphragm FET Multi-Pattern Condenser Warm Audio WA76 Discrete Compressor Bricasti Design M7 Reverb Processor SoundToys EchoBoy - Delay Plug-in

In this video we present a budget friendly FET vocal microphone shootout using the Lauten LA-220, the Studio Projects C1, the Miktek C1, and the Avantone CK-7. Can you tell which one's which? If you are interested in hea... Read more

In this video we present a budget friendly FET vocal microphone shootout using the Lauten LA-220, the Studio Projects C1, the Miktek C1, and the Avantone CK-7. Can you tell which one's which? If you are interested in hearing the results and/or getting ahold of the audio files from this shootout, give us a shout, we'd love to hear from you!  

Free 3-Year Warranty

In addition to the standard included manufacturer warranty, virtually all new products carry our exclusive, industry-leading, absolutely free Sound Pure 3-Year Warranty, which includes parts and labor. It's our way of adding real value to the personal touch our small, dedicated team brings to every purchase.

Coverage exclusions live in Terms & Conditions, Section 27. Read the warranty →

Sound Pure Studios Control Room A — Durham, NC

Sound Pure Studios · Durham, NC

Come hear it in our control rooms.

Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.

$599